Putty spraying machine will cause a series of abnormal damages because of its special construction environment and construction raw materials, as well as improper operation when using the machine. If not checked and repaired at this time, it will aggravate the failure rate of the machine and cause greater losses.

Faults of a putty spraying machine are often found in the construction process, but many putty workers are not familiar with the structure of the machine, or do not understand the causes of the problem, they can only call professional maintenance personnel, but this will delay the construction period, so it is very important to learn how to solve the common problems of putty spraying machine.

Today we are going to talk about a putty spraying machine failure: no suction!

There are many reasons for non-suction, one of which is the damage of large and small steel balls. Good size steel balls should have smooth surface and uniform color. Checking size steel balls is the first step to solve the problem of non-suction. If scratches and pitting are found on the surface of large and small steel balls, they should be replaced in time. Although there are no obvious scratches, pits and other phenomena on the surface of some large and small steel balls, but if the color of the steel balls is not uniform, the steel balls are actually lost circle. At this time, it is also necessary to replace the steel balls. There can not be a chance mentality, so as to avoid picking up sesame seeds and losing watermelon, causing greater losses!

<iframe height=498 width=510 src='http://player.youku.com/embed/XMzk5MzE3ODI1Ng==' frameborder=0 'allowfullscreen'></iframe>