Gasoline engine putty spray machine how to maintain?
Putty spraying machine has different driving types, some electric, but also gasoline engine and diesel engine, then encounter this engine type of machine, how to pay attention to maintenance, how to make the machine life longer?
The putty engine is very similar to an automobile engine.
1. After the first spray of 5000 square meters, or a week later, change the oil, how to change?
The method is to unscrew the yellow cap, tilt the machine and slowly drain the dirty oil, or use a wrench to loosen the metal cap to allow the oil to come out more thoroughly.
2. When will you change it for the second time?There's no way to say for sure, but the faster you change, the better for the engine, which is the same principle as an automobile engine.
3. Pay attention to the engine oil. You need four-stroke engine oil, which is better for the engine.
In addition, the air filter element of the engine is recommended to be blown once every 7 to 15 days according to the working environment, which can effectively remove dust from the empty filter.
The sponge of air filter element can be cleaned with gasoline and dried. Note that the paper inside cannot be washed with water, but can only be blown by wind.
Another thing to remember about refueling is that when the machine is running, the vent is hot. Do not add it to the vent to avoid ignition.
Buy an iron tape tubing and insert it into the tank to fill it up. It's safe and reliable. If not, grab a wet towel and cover the vent.
These are gasoline putty spray machine maintenance engine little knowledge, you understand it?
There are many different sizes of putty spraying machines, engines from 5.5hp to 15HP, which can ensure the power of the machine, more powerful, putty spraying.
In addition, there are also 220V electric, or 380V electric, but with electric attention, there may be reverse pump, so pay attention to the motor of the fire wire connection method, if the machine can not operate, you need to exchange the fire wire butt.
|
